20 December 2007

Home Tech: Washing Machine Problems (1)

Kenmore HE 3.1 cu. ft.
Front Loading washer


Click for larger image
A few months back we bought a Kenmore Front loading washing machine from a store that reconditions used appliances (previous post). That was almost 18 months ago. Yesterday I noticed that the machine was no longer spinning in the spin cycle. So I decided to take action.

Step one is, naturally, unplugging the machine. The big power consumer is the dryer, not the washer (this is offset somewhat by the fact that dryers usually last longer than washers do). Washing machines handle an astonishing amount of amps through a conventional 16-gauge, 3-connector cable (OK, 12 amps, but that's kind of a lot). Step two consists of shutting off the water supply. That consists of closing the two taps (see figure), screwing clockwise until they're finger tight. Then, you can detach the hoses at the washer end; they ought to be much tighter than what you can do with your hands.



Turn off the water supply
Unscrewing the hoses


Next, you need to remove the metal panels that cover the top and back of the washer.

Removing the screws attaching
the top panel to the washer.
Removing screws in back panel


Not much to explain here. The back panel pops off pretty easily, although you need to ease it over the hose nozzles.


The tricky part (mainly because it requires CAUTION) is getting the belt onto the big wheel. The belt goes over the electric motor driving wheel (that's the shaft at the bottom) with the belt grooves on the inside of the belt. Then you stretch the belt over the top of the big wheel, and you coax the wheel through a partial rotation in order to get the belt all the way on. It's very important to make sure the spinning tub is empty, and it's also very important to make certain it's impossible for your fingers to be caught in the belt.

(Part 2)


A Kenmore Front loader from behind
View of the belt being re-installed

___________________________________________

External Links: Appliance review sites tend to be unstable and in many cases I resorted to Google caches; for example, the Sears review page no longer has reviews, but Google's cached version of the page does; or check here.

Labels: